Constructed of food-grade materials and handles boiling wort. The impeller housing is made from polysulfone as it is a tough, food-grade plastic rated up to 120C. The magnetic drive acts as a clutch allowing the user to put backpressure on the pump to slow down flow. Since it is magnetic drive, itís not self priming, you must put the pump under the level of the liquid source.
This is an extremely efficient 1.1amp pump which can be run continuously at elevated temperatures.
The magnetic drive ensures no lubricated bearings are in contact with the liquid at all, so you can be sure there is no chance of any contamination of the liquid being pumped, which is why this pump is ideal for home brewing.
NOTE: The pump is sold with an Australian Standard electrical cord but it is not attached to the pump as some customers hard wire the pump to their brewery. If you wish to use the cord that is included you will need to join the cord to the pump yourself.
Voltage: 220-240 at 50-60hz
Max Head: 3.4m
Max Flow: 19L/min
Wiring: Requires wiring
Fittings: 1/2 BSP